Description:
XD6500 is an 3x3 MIMO 11ac Wi-Fi standard high power industrial Ceiling Wireless Access Point with Qualcomm Chipset , combined 1750Mbps Wi-Fi speed over 2.4GHz(450Mbps) and 5GHz(1300Mbps), equipped Gigabit WAN & LAN port, fast Ethernet data rate make more than 100 end users access into XD6500 with faster Ethernet, make them enjoy seamless HD movies, streaming, online gaming, wireless security, and other bandwidth-intensive tasks, widely be used in school, hospital, hotel, office, shipping mall...
High Power for more range and stable signal
Designed in two line Power Amplifier on PCB board, the power can be 300mW high power, 3dBi MIMO high gain antenna, together with Ceiling mount, greatly increase the wireless range to 2~4 rooms, provide the stable Wi-Fi signal for users.
Dual band with 1750Mbps data rate
Comply with 802.11ac standard, support 2.4G, and 5G dual band, then support 3*3 MIMO technology, the data rate up to 1750Mbps, users enjoy a more clear and faster wireless Ethernet access.
Power over Ethernet
XD6500 has integrated IEEE802.3at Power over Ethernet (PoE), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
Access Controller System & Cloud Management System
With Access Control System, easily access advanced network settings through PC, like AP status monitor, change IP address, ESSID, Channel, Password, upgrade firmware, backup and restore, remote control and captive portal authentication.
Besides that, it works with Cloud Management System, easy to do central and remote management, advertisement and multiple captive portal authentications like facebook/google/SMS login, make this AP more professional in Wi-Fi Projects.
Main Features:
- Comply with IEEE 802.11ac/b/g/n, 3*3 MIMO, dual-band, 1750Mbps Data Rate.
- 1*10/100/1000Mbps WAN Port, 1*10/100/1000Mbps LAN Port, faster Ethernet.
- Support active IEEE 802.3at 48V PoE standard.
- Support SSID broadcasting, Multi SSID up to 8 (4 SSID in 2.4GHz, 4 SSID in 5GHz).
- Support Gateway (PPPOE, static IP, dynamic IP), Wireless AP, Repeater, WISP operation mode.
- With the function of build in the firewall, IP filter, URL filter, and MAC filter.
- Comply with IEEE 802.3az standard, RF power adjustment and frequency analyzer for better application in a different environment.
- Support DDNS, VPN pass through, Port forwarding and DMZ host.
- Support 64/128-bit WEP security, EAP, 128bit WPA (TKIP/AES) security.
Product Spec.:
| Hardware: |
| Chipset | Qualcomm QCA9563 + QCA9880 +QCA8334 |
| Standard | 802.11ac/b/g/n, 3*3 MIMO technology |
| Memory | 128MB DDR2 RAM |
| Flash | 16MB |
| Interface | 1 * 10/100 /1000Mbps RJ45 WAN Port |
| 1 * 10/100 / 1000Mbps RJ45 LAN Port |
| 1 * Reset button, press 15 seconds to revert to the default setting |
| Antenna | Build in 3dBi 2.4G MIMO Antenna Build in 3dBi 5G MIMO Antenna |
| Power consumption | 48V PoE<30W |
| Size | 198mm X 28mm |
| Weight | |
| RF Data |
| Frequency | 2.4G:802.11b/g/n: 2.4GHz – 2.484GHz, |
| 5GHz:802.11a/n/ac: 5.150GHz～5.850GHz |
| Country code | FCC,IC,ETSI,MKK,MKK1,MKK2,MKK3,NCC,RUSSIAN,CN |
| Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM, 128-QAM, 256-QAM |
| DSSS = DBPSK, DQPSK, CCK |
| Throughput | 1200Mbps |
| 2.4G RF Power | 802.11b | 11M | 20±2dBm | 1M | 22±2dBm |
| 802.11g | 54M | 19±2dBm | 6M | 21±2dBm |
| 802.11n HT20 | MCS7 | 18±2dBm | MCS0 | 20±2dBm |
| 802.11n HT40 | MCS7 | 17±2dBm | MCS0 | 19±2dBm |
| 5G RF Power | 802.11a | 54M | 19±2dBm | 6M | 21±2dBm |
| 802.11n HT20 | MCS7 | 18±2dBm | MCS0 | 20±2dBm |
| 802.11n HT40 | MCS7 | 17±2dBm | MCS0 | 19±2dBm |
| 802.11ac HT80 | MCS9 | 16±2dBm | MCS0 | 18±2dBm |
| 2.4G Receive Sensitivity | 802.11b | 11M | -85dBm | 1M | -94dBm |
| 802.11g | 54M | -72dBm | 6M | -90dBm |
| 802.11n HT20 | MCS7 | -70dBm | MCS0 | -88dBm |
| 802.11n HT40 | MCS7 | -68dBm | MCS0 | -86dBm |
| 5G Receive Sensitivity | 802.11a | 54M | -72dBm | 6M | -90dBm |
| 802.11n HT20 | MCS7 | -70dBm | MCS0 | -88dBm |
| 802.11n HT40 | MCS7 | -68dBm | MCS0 | -86dBm |
| 802.11ac HT80 | MCS9 | -58dBm | MCS0 | -85dBm |
| EVM | 2.4G: 802.11b: ≤-10 dB; 802.11g: ≤-25 dB; 802.11n: ≤-28 dB 5G: 802.11a: ≤-25dB; 802.11n: ≤-28 dB; 802.11ac: ≤-32 dB |
| PPM | ±20ppm |
| Max Users | 128+ |
| Firmware Features: |
| Operation mode | Wireless AP, Gateway, WISP, Wi-Fi Repeater |
| WAN Type | Dynamic IP/Static IP/PPPoE |
| Wireless Security | 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption |
| SSID | Multiple SSID (4 SSID for 2.4G, 4 SSID for 5.8G) |
| Firewall | IP Address Filter/MAC Address Filter/Domain Filter
IP and MAC Address Binding DMZ |
| Protocols | IPv4 |
| Others: |
| Package Contents | 1750Mbps Dual Band wireless access point Ethernet Cable Quick Installation Guide Setting Accessory |
| System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux |
| Environment | Operating Temperature: -20~55 ℃ Extremity working Temperature: -30~70 ℃ Storage Temperature: -40~70 ℃ Humidity: 5%~95% non-condensing |
| Management | Firmware GUI, Remote Management, WLAN Controller, Cloud Management System |
