450Mbps Outdoor Antenna with 10 / 100M WAN LAN Port 5.8G 11AC Outdoor Wireless CPE
CPE450 is 5.8G Outdoor CPE with water-proof and dust-proof case, comply with IEEE 802.11ac/a standard, 450Mbps data rate ensures high speed internet access. With high power design, built in 12dBi high gain panel Antenna,greatly increase the WiFi range to 2KMs. Meanwhile, integrated passive Power over Ethernet (PoE), CPE450 can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure and lower cost; Work with AC Controller & Cloud Management System for centralized and remote management, easy configure and maintance in mass installation.
Features:
More RF Power, More WiFi Range
More RF Power up to 28dBm, equipped with 12dBi Panel Antenna, PTP WiFi distance up to 2000 meters. Meanwhile, the RF Power is adjustable for different country to comply with different WiFi Standards.
11ac, 5.8G, 450Mbps Wireless Speed
Comply with IEEE 802.11ac/a standard,5.8G, 450Mbps data rate for more smoothly data transmission
Multi operation mode for different environment
CPE450 support multi operation mode such as Gateway, Wireless AP, Repeater, WISP, WDS mode to meet with multi application for different environment.
PoE Power and DC Power together make installation flexibility
CPE450 Support 24V passive PoE for some areas where power outlets are not readily available; It support DC power supply for some area near to power socket, flexibility in installation
Excellent Outdoor Weatherproof and Lighting Protection
With an outdoor waterproof and dustproof enclosure,buidling in lighting protection IC, CPE450 can be used in various weather conditions for stable performance
Spec:
| Hardware: |
| Chipset | RTL8881AN |
| Standard | 802.11ac/a/n |
| Memory | 64MB DDR2 RAM |
| Flash | 8MB |
| Interface | 1 * 10/100Mbps RJ45 WAN Port |
| 1 * WDS Switch Button for WDS Connection |
| 1 * DC Injector |
| 1 * 10/100Mbps RJ45 LAN Port |
| 1 * Reset button, press 15 seconds to revert to default setting |
| Antenna | Build in 12dBi MIMO Panel Antenna |
| Power consumption | 24V PoE<17W |
| Size | L 233mm, W: 77mm, H: 35 mm |
| RF Data |
| Frequency | 5GHz: 802.11a/n/ac |
| 5GHz |
| Country code | FCC,IC,ETSI,MKK,MKK1,MKK2,MKK3,NCC,RUSSIAN,CN |
| Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM |
| DSSS = DBPSK, DQPSK, CCK |
| Throughput | 450Mbps |
| RF Power | 802.11a:54M 23±2DB,6M 26±2DB. 802.11n HT20:MCS7 23±2DB, MCS0 26±2DB. 802.11n HT40:MCS7 22±2DB, MCS0 25±2DB. 802.11ac HT80:MCS9 20±2DB, MCS0 23±2DB. |
| Receive Sensitivity | 802.11a: -72dbm@54Mbps; -90dbm@6Mbps. 802.11n HT20: -70dbm@MCS7, -90dbm@MCS0 . 802.11n HT40: -66dbm@MCS7, -90dbm@MCS0 . 802.11ac HT80:-60dbm@MCS9, -86dbm@MCS0 . |
| EVM | 802.11a: ≤-25 DB 802.11n: ≤-28 DB 802.11ac: ≤-28 DB |
| PPM | ±20ppm |
| Firmware Features: |
| Operation mode | Wireless AP, Gateway, WISP, WiFi Repeater |
| WAN Type | Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access) |
| Wireless Security | 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption |
| SSID | Multiple SSID up to 4 |
| Firewall | DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter
IP and MAC Address Binding |
| Protocols | IPv4 |
| Others: |
| Package Contents | 450Mbps Outdoor CPE Ethernet Cable Quick Installation Guide Setting Accessory |
| System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux |
| Environment | Operating Temperature: -40~55 ℃ Storage Temperature: -40~70 ℃
Operating Humidity: 10%~90% non-condensing; Storage Humidity: 5%~90% non-condensing |
| Management | Firmware GUI ,Remote Management, WLAN Controller, Cloud Management System |
Working Diagram:
