450Mbps 300mW PTP PTmP 5KM 5.8G 11AC Outdoor Wireless WiFi Bridge Dustproof
Features:
433Mbps Data Rate
CPE-430SR features 802.11ac Wi-Fi and MIMO technology, 450Mbps wireless speed ensures high speed internet access and more end users access.
High Power and High Gain Antenna for more range
Designed in Power Amplifier on PCB board, the power can be 300mW high power, 12dBi MIMO high gain antenna, increase the WiFi range to 2KMs distance and supply the stable WiFi signal for users.
Power over Ethernet
CPE-430SR has integrated passive Power over Ethernet (PoE), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
Access Controller System & Cloud Management System
With Access Control System under AP operation mode, easily access advanced network settings through PC, like AP status monitor, change IP address, ESSID, Channel, Password, upgrade firmware, backup and restore....
Then work with Cloud Management System, easy to do central and remote management, advertisement and multiple authentication make this AP more professional in WiFi Projects.
Main Features:
Comply with IEEE 802.11ac/a standard, 5G,450Mbps Data Rate
1*10/100/100Mbps WAN Port,1*10/100Mbps LAN Port
300mW high power, build in 12dBi MIMO panel antenna, stronger signal strength, more wireless coverage
Support passive PoE
Support SSID broadcasting, Multi SSID up to 4
Support Gateway (PPPOE, static IP, dynamic IP), Wireless AP, Repeater, WISP operation mode
With function of build in firewall, IP filter, URL filter and MAC filter
Comply with IEEE 802.3az standard, beamforming technology, RF power adjustment and frequency analyzer for better application in different environment
Support DDNS, VPN pass through, Port forwarding and DMZ host
Support 64/128-bit WEP security, 128bit WPA (TKIP/AES) security
Spec:
| Hardware: |
| Chipset | RTL8881AN |
| Standard | 802.11ac/a/n |
| Memory | 64MB DDR2 RAM |
| Flash | 8MB |
| Interface | 1 * 10/100Mbps RJ45 WAN Port |
| 1 * 10/100 Mbps RJ45 LAN Port |
| 1 * WDS Switch Button for WDS Connection |
| 1 * DC Injector |
| 1 * Reset button, press 15 seconds to revert to default setting |
| Antenna | Build in 12dBi MIMO Panel Antenna |
| Power consumption | 24V PoE<17W |
| Size | L 230mm, W: 75mm, H: 40mm |
| RF Data |
| Frequency | 5GHz: 802.11a/n/ac |
| 5GHz |
| Country code | FCC,IC,ETSI,MKK,MKK1,MKK2,MKK3,NCC,RUSSIAN,CN |
| Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM |
| DSSS = DBPSK, DQPSK, CCK |
| Throughput | 450 Mbps |
| RF Power | 802.11a:54M 20±2DB,6M 23±2DB. 802.11n HT20:MCS7 19±2DB, MCS0 22±2DB. 802.11n HT40:MCS7 18±2DB, MCS0 21±2DB. 802.11ac HT80:MCS9 18±2DB, MCS0 21±2DB. |
| Receive Sensitivity | 802.11a: -72dbm@54Mbps; -90dbm@6Mbps. 802.11n HT20: -70dbm@MCS7, -90dbm@MCS0 . 802.11n HT40: -66dbm@MCS7, -90dbm@MCS0 . 802.11ac HT80:-60dbm@MCS9, -86dbm@MCS0 . |
| EVM | 802.11a: ≤-25 DB 802.11n: ≤-28 DB 802.11ac: ≤-28 DB |
| PPM | ±20ppm |
| | |
| Firmware Features: |
| Operation mode | Wireless AP, Gateway, WISP, WiFi Repeater, WDS |
| WAN Type | Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access) |
| Wireless Security | 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption |
| SSID | Multiple SSID up to 4 |
| Firewall | DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter
IP and MAC Address Binding |
| Protocols | IPv4 |
| Others: |
| Package Contents | 450Mbps Outdoor CPE Ethernet Cable Quick Installation Guide Setting Accessory |
| System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux |
| Environment | Operating Temperature: -40~55 ℃ Storage Temperature: -40~70 ℃
Operating Humidity: 10%~90% non-condensing; Storage Humidity: 5%~90% non-condensing |
| Management | Firmware GUI ,Remote Management, WLAN Controller, Cloud Management System |
Working Diagram:
